AR316IT image

Sans Digital AccuRAID AR316IT 16Bay 2x 10GbE iSCSI to SAS SATA RAID 6. Upgradable

  • $5,990.00


Sans Digital AccuRAID AR316IT - 3U 16 Bay 2x 10GbE iSCSI to SAS/SATA RAID 6 Upgradable to Redundant Controller

 


 

ar316i.jpg

 

 

 

 

 

 

 

Overview:

The AccuRAID AR316IT is a 3U 16-bay quad channel (4x GbE) iSCSI to SAS/SATA RAID subsystem with redundant controller upgradeable option. With built-in 2x 10Gb Ethernet ports supporting independent access, fail-over or load-balancing (802.3ad port trunking, LACP), AR316IT is capable of composing a high performance SAN environment with a fraction of the cost of Fibre Channel RAID storage systems. Built-in redundant controller ready backplane allows non-destructive redundancy controller upgrade path without purchasing a brand new hardware. Supporting RAID 0, 1, 1+0, 3, 5, 6, 30, 50, 60 and JBOD, with global or dedicated hot spare disks, multiple hard drive failure could be protected without downtime or data loss.

The built-in powerful 64-bit RAID processor provides high performance through-put. The built-in Snapshot feature provides point-in-time copy of saved data without relying on the host software. Management is available via Web and Secure Web (HTTPS), SSH telnet or serial console, with built-in event notification via e-mail or SNMP trap. Redundant power supplies, cooling fans and controllers are part of the modularized design to allow redundancy as well as off-self spare parts to eliminate downtime. To increase the return of investment, AR316IT supports both SAS and SATA drives, and could be expanded by adding up to 3 additional SAS/SATA JBOD units, providing solutions up to 64-bays or 128TB in total storage capacity. Intended to provide storage solution for IT and vitalization server computing with VMware vSphere or, Microsoft Hyper-V or Citrix with SCSI-3 persistent target support, the AR316IT is a perfect solution for Storage Area Network needs in IT and other applications.

Visit AccuRAID AR316IT and AR316ITR Features and Performance Comparison for more details.

Note: Sans Digital recommends the use of enterprise hard drives when in use with any RAID controller applications. Standard desktop or green desktop drive may not be supported and may compromise RAID system stability and performance. For more information on the difference between RAID and desktop hard drives, please see the Western Digital knowledge base. For a list of compatible RAID Edition SATA hard drives, please refer to the list below:

  • Seagate 500GB (ST3500514NS) 
  • Seagate 750GB (ST3750330NS) 
  • Seagate 1TB (ST31000524NS) 
  • Seagate 2TB (ST32000644NS)
  • Western Digital 500GB (WD5002ABYS)  
  • Western Digital 1TB (WD1002FBYS) 
  • Western Digital 2TB (WD2003FYYS)
  • Hitachi 500GB (0F11000)
  • Hitachi 1TB (0A39289) 
  • Hitachi 2TB (0F10452)
  • Hitachi 3TB (0F12456)

 

 

Features:

Architecture

  • Intel IOP 342 64-bit processor with 2GB on-board ECC cache memory (upgradeable to 4GB).
  • Single controller with redundant controller upgrade option.
  • Up to 1300MB/s and 220K IOPS with dual redundant contoller.
  • SAS / SATA II RAID 60 ASIC engine, providing the highest level of data protection.
  • Supports Dual 10G Channel, or 2 * Gigabit Ethernet, supports 802.3ad port trunking, LACP.
  • Support SCSI-3 Persistent Target for Windows Server clustering.
  • Support VMware Sphere, ESX/ESXi 4.0, Microsoft Hyper-V and Citrix
  • Supports SAS or SATA Hard drives.
  • Redundant and hot-swappable power supply and cooling fans.
  • O/S-Independent and host transparent RAID solution.

RAID

  • Supports JBOD, RAID 0, 1, 0+1, 3, 5, 6, 30, 50, 60 with global and dedicated hot spare and multiple volumes.
  • RAID 6 tolerates multiple drive failures without downtime or data loss, providing the most advanced level of data protection.
  • Supports online array migration and online capacity expansion.
  • Hot swappable drives that support hot spare and automatic hot rebuilding with automatic drive insertion/ removal detection.
  • Built-in Snapshot and Windows Volume Shadow Copy Support (VSS)

Management

  • Embedded enclosure management through WEB GUI, LCD control panel, and online RAID management via serial port.
  • Intuitive, yet comprehensive GUI for configuration and monitoring from remote and local locations.
  • Built-in event notifcation via e-mail and SNMP trap.
  • iSNS and DHCP supported

 

 

Specifications:

Model  AR316IT
 Form Factor  3U Rackmount
 HDD Trays  16 Hot-Swappable 3.5"
 Reduntant Controller  Single Controller, Redundant Controller Upgradeable
 (Redundant Controller Modules Upgrade Part # MB-SAN-AR316ITC)
 RAID Level  0, 1, 0+1, 3, 5, 6, 30, 50, 60, JBOD
 Maximum Capacity  48TB
 Auto Rebuilding  Yes
 Hot-Spare  Global or Dedicated Hot Spare Disk
 Host Interface & Transfer Rate  Gigabit Ethernet 10Gb * 2 support 802.11ad (Up to 600MB/s)
 LACP and Jumbo Frame supported
 Drive Interface  SAS / SATA II
 Cooling Fan  4 Hot-Swappable Modules and Blowers
 Power Supply  500W X 2 Redundant power supplies w/ PFC
 Control Interface  LCD Panel, RS232, RJ-45 Ethernet
 Status Indicators  HDD, Fail, and Overheat
 Multi-Path IO  Yes
 Snapshot  Yes (up to 32), Built-in Snapshot wthout reply on host software
 Max. Host Connections  32
 Max. Host Clustering  16 multiple host clustered for one logical volume
 Max. Session  128
 Battery Backup  Optional
 Dimension (in)  19"W x 20.5"D x 5.5"H
 Weight (lb)  44lb
 Safety Regulations  CE, FCC, UL, RoHS
 Limited Warranty  3 Years
 Package Contents  Rail Bracket(1 Set)
 Power Cords (2)
 Serial Cable (1)
 Ethernet Cable (1)
 Hard Drive Mounting Screws and trays
 CD and User Guide (1)

 

 

Available Models:

 Model  AR316IT  AR316IT16E  AR316IT32E  AR316IT48E
 Hard Drive  No HDD
 Bundle
 1TB RAID 
 SATA II * 16
 2TB RAID 
 SATA II * 16
 3TB RAID 
 SATA II * 16 
 Total Storage Size  N/A  16TB  32TB  48TB

 

 Model AR316IT8S   AR316IT16S  AR316IT32S  AR316IT48S
 Hard Drive 500GB SAS HD * 16   1TB  SAS HD * 16  2TB  SAS HD * 16   3TB  SAS HD * 16
 Total Storage Size 8TB  16TB  32TB  48TB

 

 

Photos: